||Epoxy powder coating
||No Antimicrobial Additives, No Flame Retardant Additives, Use Outdoor
||A combination of the following depending on the model selected:
1) 100% steel surfaces: 100% hot-dip galvanized Steel with a glossy, epoxy-powder coated color. The products have obtained the corrosion resistance standards UNI EN ISO 9227:2012. The laboratory test, conducted in a neutral salt spray chamber, certifies the strength of the material and surface coatings, simulating their behaviour in high-corrosion environments.
3) 100% aluminum surfaces.
|Cleaning and Maintenance
||For steel surfaces: No special maintenance required. Inspect elements for scratched or vandalised areas as these could rust.
At least 3 times a year:
Use low pressure cold water, at least 3 times a year.
Use hot water (122-140° F / 50-60° C) and 3,5-4 bar pressure once a year.
For aluminum surfaces: W: Gently wipe off any spill or debris. After, dip a lint-free cloth into a mild soap and water mixture. Scrub gently over the stained area.
|Works for Series
|Does Not Work on Series
||Featured on Sierra round tables & companion cube chairs, but available at an extended lead time (conditions apply) on all applicable outdoor surfaces.